SITRANS F M MAG 1100 is a wafer design sensor in stainless steel with highly resistant liners and electrodes and is designed for the general industry environment. The flangeless wafer design meets all flange standards.

The SITRANS F M MAG 1100 is used in all industries where the corrosion-resistant stainless steel housing and the highly resistant liner and electrodes fit even the most extreme process media.

Benefits:

• Compact wafer design meets EN 1092, DIN and ANSI flange standards
• Easy Plug & Play field changeability of transmitter
• Compact or remote mounting possible
• Highly resistant liner and electrodes that are suitable for most extreme process media
• Designed to allow patented MAG in-situ verification using the SENSORPROM fingerprint

Product Webpage

Rotork has announced an extensive advancement of CMA electric actuation technology for the operation of process control valves, introducing new options to meet evolving customer and market requirements. With the latest developments, the innovative CMA design can now be specified with increased functionality encompassing local controls, LCD positional display and programmable fail-to-position performance.

Designed for quarter-turn, rotary or linear operation, robust Rotork CMA actuators perform numerous process control valve, metering pump and damper applications demanding precise position control and continuous modulation. Single-phase or DC electrical power is all that is required for simplified installation and control valve actuation. Explosionproof certification to international standards is available for hazardous area applications.

Local controls now offer manual operation at the valve, combined with a vivid LCD display of valve position which also incorporates critical and non-critical fault symbols. Control selection knobs enable selection of Local, Stop or Remote operation and Open or Close input commands in the Local control mode. Each mode can be locked in place to prevent unauthorised operation. The LCD display shows the valve position as a precise percentage of total valve travel.

For fail-to-position performance, a reserve power pack provides the actuator with the ability to perform a predetermined action on power failure. The power pack also preserves position indication on the LCD display during power failure. Upon restoration of mains power, the power pack is swiftly recharged to ensure continued fail-to-position functionality. Action on power loss is easily configured with the standard CMA HMI interface as part of the user-friendly actuator set-up menu, utilising a 6-segment LCD display and push button configuration.

The maintenance-free CMA drive train, environmentally protected to IP67 and permanently lubricated for operation in sub-zero temperatures as standard, can be mounted in any orientation. Accepting an industry-standard 4-20mA control signal, the CMA provides accurate, repeatable and backlash-free positional control. Resolution is 0.2% on linear and quarter-turn applications, 2 degrees on the multi-turn models. All CMA actuators have output speeds that are adjustable down to 50% of full speed in 10% increments and manual operation is provided as standard. Network compatibility encompasses Rotork Pakscan, HART®, Profibus®, Modbus®, DeviceNet® and Foundation Fieldbus®.

The latest CMA developments follow other recent refinements including upgraded electronics, HMI enhancements and a user selectable increased seating torque/thrust option, enabling a more tailored and cost-effective sizing regime to be applied to the combination of modulating and tight seating demands often found in control valve applications. A new rotary model size has also been introduced.

The combination of all these improvements represents a comprehensive advancement of CMA actuator technology and functionality, focussed on precise process valve control, system simplification and reduced maintenance. In addition to traditional control valves, successful CMA applications include choke valves on shale gas installations, stroke adjusters on metering pumps, precision metering on chemical dosing and the operation of dampers.

The Sage Basic is the affordable thermal mass meter. The Basic provides an accurate and reliable mass flow measurement at a very economical price. Featuring low power consumption, the Basic can be used for any gas. The all stainless steel probe or in-line sensor provides durable construction. Both a 4-20 mA signal and a pulse output are provided.

Used with rugged all stainless steel probes and in-line flow bodies as used on all Sage thermal mass flow meters. NEMA rated rainproof enclosure suitable for many installations. Can be used with any gas. Provides both a 4-20 mA and a pulse output for external totalization. Can be configured using Sage Addresser software. Low power dissipation, under 2.5 Watts (e.g. under 100 ma at 24 VDC).

Product Webpage

Promag D, the wafer device is designed for all applications where space is at a minimum. Combined with Proline 400, the transmitter for optimized measurement of water and wastewater, Promag D 400 will be the preferred basic solution for all applications in the water industry with space restrictions. Promag D 400 also offers time-saving local operation via the integrated web server without additional software and hardware, as well as an integrated verification with Heartbeat Technology™.

Benefits:

• Easy, fast centering of the sensor – innovative housing construction
• Energy-saving flow measurement – no pressure loss due to cross-section constriction
• Safe operation – no need to open the device due to display with touch control, background lighting
• Time-saving local operation without additional software and hardware – integrated web server
• Integrated verification – Heartbeat Technology™

Field of application:

The electromagnetic measuring principle is unaffected by pressure, temperature and flow profile. For basic water applications; optimized for limited space and plastic pipe installations.

Device properties:

• Short installation length and low weight
• Integrated ground disks made of stainless steel
• International drinking water approvals
• Transmitter housing made of durable polycarbonate

Product Webpage